ATTACK PELLET 30 AUTOMATIC PLUS Instructions For Use Manual page 28

INSTRUCTIONS OF USE OF CONTROL PANEL
Discription of main display
H \
1. Operating modes of the regulator: IGNITION, STABILIZATION, FLAME CHECKING, MUTE,
EXTINGUISHING, STOPPING, CHIMNEY;
2. Set boiler temperature – holding this will cause the change of the temperature;
3. Currently measured boiler temperature;
4. Main menu;
5. Graphical display of operation:
ventilator (fan);
feeder;
pump;
ignition coil .
6. Currently measured DHW temperature;
7. Set DHW temperature - holding it will cause the value to be adjusted;
8. Time and date;
9. External temperature;
10. Values affecting the set temperature, where the symbols mean:
- room thermostat contacts open - the set room temperature has been reached;
- reduction of the set temperature according to active time intervals;
26