ATTACK PELLET 30 AUTOMATIC PLUS Instructions For Use Manual page 36

Hide thumbs Also See for PELLET 30 AUTOMATIC PLUS:
Table of Contents

Advertisement

13 Central heating and DHW setting
13.1 The hydraulics operate in the off mode
13.2 CH pump activation temperature - Switch-on temperature of the DHW pump
13.3 Minimum DHW temperature
13.4 Maximum DHW temperature
13.5 Boiler increase by DHW, Mixer - Boiler temperature increase
13.6 Extending DHW pump operation time
13.7 Exchanger
13.8 DHW heat source
14 Buffer settings
14.1 Buffer support
14.2 Loading start temperature
14.3 Loading end temperature
14.4 Start heat instalation
15 Mixer 1 settings
15.1 Thermostat select
15.2 Mixer 1 support
15.2.1 OFF
15.2.2 CH on - switched on Central heating
15.2.3 Floor on
15.2.4 Pump only
15.3 Heat source
15.4 Min. Mixer 1 temp
15.5 Max. Mixer 1 temp
15.6 Proportional range
15.7 Integration time constant
15.8 Valve full opening time
15.9 Off by thermostat
15.10 Mixer without reaction
16 Mixer 2 settings
16.1 Thermostat select
16.2 Mixer 2 support
16.2.1 OFF
16.2.2 CH on - switched on Central heating
16.2.3 Floor on
16.2.4 Pump only
16.3 Heat source
16.4 Min. Mixer 2 temp
16.5 Max. Mixer 2 temp
16.6 Proportional range
16.7 Integration time constant
16.8 Valve full opening time
16. Off by thermostat
16.10 Mixer without reaction
17 Return protection
17.1 Return protection
17.2 Minimum preset return temp.
17.3 Return temp hysteresis
17.4 Valve closing
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pelh30plus

Table of Contents