Installation and Connection
DC-
DC+
3
Figure 3.7 (d) - Frame size G with special DC hardware: Terminals for DC voltage supply. Terminals R/L1, S/L2 and T/L3 are not
internally connected in this version
3.2.2 Power / Grounding Wiring and Fuses
ATTENTION!
Use proper cable lugs for the power and grounding connection cables.
ATTENTION!
Sensitive equipment such as PLCs, temperature controllers, and thermocouple cables, must be kept at
a minimum distance of 0.25 m (9.84 in) from the frequency inverter and from the cables connecting
the inverter to the motor.
DANGER!
Wrong cable connections:
- The inverter will be damaged if the power supply is connected to the output terminals (U/T1, V/T2,
or W/T3).
- Check all the connections before powering up the inverter.
- When replacing an existing inverter by a CFW-11, check if the installation and wiring are according
to the instructions listed in this manual.
3-9