Start-Up; P0000 Password Setting - WEG CFW-11 Series User Manual

First Time Power-Up and Start-Up

5.2 START-UP

The start-up procedure for the V/f is described in three simple steps by using the Oriented Start-up routine
and the Basic Application group.
Steps:
(1) Set the password for parameter modification.
(2) Execute the Oriented Start-up routine.
(3) Set the parameters of the Basic Application group.

5.2.1 P0000 Password Setting

Step Action/Result
- Monitoring Mode.
- Press "Menu"
1
(right soft key).
- The group "00 ALL
PARAMETERS" is already
2
selected.
- Press "Select".
- The parameter
"Access to Parameters
3 P0000: 0" is already
selected.
5
- Press "Select".
- In order to set the
password, press
4
until the number 5
appears on the display.
- When the number 5
5
appears, press "Save".
- If the setting was
performed correctly, the
display must show "Access
6 to Parameters
P0000: 5".
- Press "Return"
(left soft key).
5-2
Display Indication
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready LOC 0rpm
Access to Parameters
P0000: 0
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Ready 0rpm
LOC
P0000
Access to Parameters
0
Return 15:45 Save
Ready LOC 0rpm
P0000
Access to Parameters
5
Return 15:45 Save
Ready LOC 0rpm
Access to Parameters
P0000: 5
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Figure 5.1 - Steps for allowing parameter modification via P0000
Step Action/Result
7 - Press "Return".
- The display returns to the
8
Monitoring Mode.
Display Indication
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu