WEG CFW-11 Series User Manual page 17

General Information
1 USB connector
2 USB LED
2 Off: Without USB connection
On/blinking: USB communication active
Status LED
3
Green: Normal operation without fault or alarm
Yellow: In the alarm condition
Blinking red: In the fault condition
2.4 CFW-11 IDENTIFICATION LABELS
There are two identification labels on the CFW-11: one complete nameplate is affixed at the side of the inverter
and a simplified label is located under the keypad. The label under the keypad allows the identification of the
most important characteristics of the inverter even if they are mounted side-by-side.
Rated input data (voltage, number of
power phases, rated currents for use with
Normal Duty (ND) and Heavy Duty (HD)
Current specifications for use with the
Normal Duty (ND) cycle
Current specifications for use with the
2-8
Figure 2.3 - LEDs and USB connector
CFW-11 model
WEG part number
Inverter net weight
cycles, frequency)
Heavy Duty (HD) cycle
(a) Nameplate affixed at the side of the inverter
CFW-11 model
CFW110242T400YZ
WEG part number
12345678
SERIAL#:
(b) Label located under the keypad
Figure 2.4 (a) and (b) - Identification labels
3
2
Manufacturing date (day/month/year)
Serial number
Maximum ambient temperature surrounding the
inverter
Rated output data (voltage, number of power
phases, rated currents for use with Normal Duty
(ND) and Heavy Duty (HD) cycles, overload
currents for 1min and 3 s, and frequency
range)
Manufacturing date (day/month/year)
99/99/9999
Serial number
1234567980
1