WEG CFW-11 Series User Manual page 81

Option Kits and Accessories
Part number and model of each available accessory are presented in the table 7.2. The accessories can be
ordered separately and will be shipped in individual packages containing the components and the manual with
detailed instructions for the product installation, operation, and programming.
ATTENTION!
Only one module at a time can be fitted into each slot (1, 2, 3, 4 or 5).
WEG Part
Name
Number
11008162 IOA-01
11008099 IOB-01
11008100 ENC-01
11008101 ENC-02
11008102 RS485-01
11008103 RS232-01
11008104 RS232-02
11008105 CAN/RS485-01 CAN and RS-485 interface module (CANopen / DeviceNet / Modbus).
11008106 CAN-01
11008911 PLC11-01
11126732 IOE-01
11126735 IOE-02
11126750 IOE-03
11126674 IOC-01
11126730 IOC-02
11045488 PROFIBUS DP-01 Profibus DP communication module.
11008107 PROFDP-05
11008158 DEVICENET-05
10933688 ETHERNET/IP-05 Ethernet/IP interface module.
11008160 RS232-05
11008161 RS485-05
11008912 MMF-01
11008913 HMI-01
11010521 RHMIF-01
7
11010298 HMID-01
11337634 KMF-01
11337714 KMG-01
10960847 CCS-01
10960846 CONRA-01
(1) Refer to the PLC module manual.
(2) Refer to the Anybus-CC communication manual.
(3) Refer to the programming manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the inverter or Null-Modem
standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
7-4
Table 7.2 - Accessory models
Control accessories for installation in the Slots 1, 2 and 3
IOA module: 1 voltage/current analog input (14 bits); 2 digital inputs; 2
voltage/current analog outputs (14 bits); 2 open-collector digital outputs.
IOB module: 2 isolated analog inputs (voltage/current); 2 digital inputs; 2
isolated analog outputs (voltage/current) (the programming of the outputs
is identical as in the standard CFW-11); 2 open-collector digital outputs.
5 to 12 Vdc incremental encoder module, 100 kHz, with an encoder
signal repeater.
5 to 12 Vdc incremental encoder module, 100 kHz.
RS-485 serial communication module (Modbus).
RS-232C serial communication module (Modbus).
RS-232C serial communication module with DIP-switches for programming
the microcontroller FLASH memory.
CAN interface module (CANopen / DeviceNet).
PLC module.
Input module with 5 PTC type sensors.
Input module with 5 PT100 type sensors.
Input module with 5 KTY84 type sensors.
IOC module with 8 digital inputs and 4 relay outputs
(use with SoftPLC).
IOC module with 8 digital inputs and 8 NPN open collector digital outputs
(use with SoftPLC).
Anybus-CC accessories for installation in the Slot 4
Profibus DP interface module.
DeviceNet interface module.
RS-232 (passive) interface module (Modbus).
RS-485 (passive) interface module (Modbus).
Flash Memory Module for installation in the Slot 5 – Factory Settings Included
FLASH memory module.
Stand-alone HMI, blank cover, and frame for remote mounted HMI
Stand-alone HMI.
(4)
Remote HMI frame kit (IP56).
Blank cover for the HMI slot.
Frame size F movement kit.
Frame size G movement kit.
Control cable shielding kit (supplied with the product).
Control rack (containing the CC11 control board).
Description
Miscellaneous
Identification
Parameters
Slot
P0027 P0028
1 FD-- ----
1 FA-- ----
2 --C2 ----
2 --C2 ----
3 ---- CE--
3 ---- CC--
3 ---- CC--
3 ---- CA--
3 ---- CD--
1, 2 and 3 ---- --xx
(1)(3)
1 25-- ----
1 23-- ----
1 27-- ----
1 C1 ----
1 C5 ----
3 ---- C9
4 ---- --xx
(2)(3)
4 ---- --xx
(2)(3)
4 ---- --xx
(2)(3)
4 ---- --xx
(2)(3)
4 ---- --xx
(2)(3)
5 ---- --xx (3)
HMI - -
- - -
HMI - -
- - -
- - -
- - -
- - -