Hmi Installation At The Cabinet Door Or Command Panel (Remote Hmi); Electrical Installation - WEG CFW-11 Series User Manual

Installation and Connection

3.1.5 HMI Installation at the Cabinet Door or Command Panel (Remote HMI)

65.0 [2.56]
3
Figure 3.6 - Data for the HMI installation at the cabinet door or command panel – mm [in]
The keypad frame accessory can also be used to fix the HMI, as mentioned in the table 7.2.

3.2 ELECTRICAL INSTALLATION

DANGER!
The following information is merely a guide for proper installation. Comply with applicable local
regulations for electrical installations.
DANGER!
Les informations suivantes constituent uniquement un guide pour une installation correcte. Respectez
les réglementations locales en vigueur pour les installations électriques.
DANGER!
Make sure the AC power supply is disconnected before starting the installation.
DANGER!
Vérifiez que l'alimentation secteur CA est débranchée avant de commencer l'installation.
ATTENTION!
Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit
protection must be provided in accordance with applicable local codes.
3-6
28.5 [1.12]
23.5 [0.93]
35.0 [1.38]
∅4.0 [0.16] (3X)