Avaya CU360 Release Notes page 81

© 2021 Avaya Inc. All rights reserved
•
•
•
Sharing from a PC/Mac - Avaya AV Grabber
The Avaya AV Grabber, available as part of the Optional Cable Kit for Avaya CU360, allows to
connect in wired mode a computer (PC or Mac) to the CU360 as presentation source for the
CU360 Video-collaboration Application.
The audio from the PC/Mac (via HDMI) can also be heard locally, on the CU360 app audio output,
and shared as part of the presentation.
To connect your PC or Mac to the CU360 USB port using the AV grabber, please follow the
instructions below:
•
•
Figure 98: Avaya AV Grabber: connection with Computer and CU360
The computer will detect the presence of the grabber as additional monitor. You can duplicate the
desktop of your computer or you can extend it over the additional monitor.
Release Notes for Avaya Collaboration Unit CU360
How to install an Avaya Conference Client for Screen Link
To install an Avaya Conference Client for Screen Link, you can browse to the CU360 web
page and click on Avaya Conference Client package for Windows/Mac.
Once installed, press About icon to launch the Conference Client if not automatically
started.
Connect the Computer to be used as presentation source to the HDMI INPUT connector
on the AV Grabber using an HDMI cable (not provided).
Connect the USB connector on the AV Grabber to USB 3.0 connector on CU360 using the
provided USB cable.
•
Important!
•
If you need to use an USB hub to connect the AV grabber to the CU360, assure
that it 3.0 and properly powered on.
•
If the USB hub is not 3.0 or is not properly powered, when the grabber is in use
the device could reset unexpectedly due to excessive power consumption from
the grabber.
The CU360 Video-collaboration Application 81