Avaya CU360 Release Notes page 79

© 2021 Avaya Inc. All rights reserved
To share an app in a call while in split mode, press Presentation button on the GUI of the CU360
App or on the remote-control. The remaining portion of the screen, excluding the CU360 App
portion, will be transmitted.
•
•
•
•
Sharing from a PC/Mac - Screen Link
It is possible to activate a "Screen Link" pairing between a Workspace Client or an older
Equinox/Scopia® Desktop Client application (Windows PC or Mac) and a nearby CU360 endpoint.
This pairing allows viewing the computer desktop on the endpoint screen without using a cable
and using only the network connectivity between the computer and the Codec Unit.
On PC or Mac, launch the Client application. If this application is not available on your computer,
see How to install an Avaya Conference Client for Screen Link below, or connect to your
Workspace/Equinox portal to download it.
Once the client application is running on your computer, right click on its icon on the tray bar to
activate the Screen Link.
Figure 94: Screen Link Activation in Workspace Client for Windows
Figure 95: Screen Link Activation in Scopia Desktop Client
•
•
Release Notes for Avaya Collaboration Unit CU360
Important
When the CU360 App is displayed as a floating window, it will become part of the shared
screen. Minimize the window to a single icon to avoid transmitting video content as part of
the presentation.
*It can rarely happen that when selecting an app through the "Apps" icon, the screen is
not split in two, but the chosen app is shown full screen. In this case you can always split
the screen in two by pressing the bottom bar square button.
Audio from split apps can be heard locally but not transmitted or recorded or streamed.
Search for Endpoints (Automatic acoustic pairing): this option will generate an
ultrasonic sound (18 kHz, preceded by an audible short beep) that can be detected by a
nearby endpoint for acoustic pairing. A list of all the detected endpoints will be displayed
by the Screen Link Client, together with their status (represented by icons). Detected
endpoints are automatically wake up from standby mode to display on their screen the
title bar with their name and IP address. Please note that the sonic detection is done
through the embedded mics of the Codec Units, when the CU app is running, even if a
different USB or BT mic is connected.
Enter a Manual Location /Connect to Other Endpoint (Manual pairing): you can
manually select an endpoint in the Screen Link Client by its IP address. If the endpoint is
The CU360 Video-collaboration Application 79