Avaya CU360 Release Notes page 125

© 2021 Avaya Inc. All rights reserved
Category
Release Notes for Avaya Collaboration Unit CU360
Case Number/
Description of issue
Ticket ID
When registered to IPO (sip
server), Avaya XT7100, XTE240
and XT4300 and Avaya CU360
endpoints might not receive
IPOFFICE-109632 presentation.
This happens if your IPO version
is outdated and does not
recognize the endpoint. See SR
1-11610561268 above.
Cisco SX80 TC7.2.0 is not able to
receive SIP TLS incoming calls if
Cisco SX80
the Avaya endpoint is
configured with AES256.
The Avaya endpoint doesn't
QC#26789 display the message to be in call
JIRA-57114 hold when Flare iPad is put in
hold
Using Polycom MGC50 (v
QC#2766 8.0.2.6) sometimes H.239
presentation does not function.
Polycom diagnostics incorrectly
QC#2981
identifies Avaya endpoints.
Incident #16384-10505: Remote
camera switch from HDX to
QC#11493 Avaya endpoint and reverse is
not performed. Issue reported
to Polycom.
Cisco C20 cannot control the
QC#2964 Avaya endpoint camera in H.323
calls.
Polycom MGC systems (v9.0)-
Avaya endpoint does not receive
the video stream when it is
QC#6665
connected to MGC with default
settings (reference Pivotal
#16384-7589).
LifeSize Express LS_EX1_3.0.7 (2)
produces corrupted audio in SIP
calls with audio coding based on
QC#5567 G.722.1 Annex C, 48 kHz.
Avaya endpoint cannot establish
incoming point-to-point SIP calls
if H.264 coding is used.
IOT issue with Tandberg/CISCO
QC#16828 MXP1500.
Reported to Tandberg/Cisco.
The Tandberg/CISCO MXP1500
does not send video to the as
QC#17464
soon as a call is started.
Reported to Tandberg/Cisco.
Avaya 10x0(LifeSize) v4.8 issue.
Avaya Integration Rad #57
[XT/SIP]: An Avaya XT Series or
QC#16857 CU360 endpoint registered with
SIP cannot share content (via
BFCP) with Avaya 1000-series
endpoints.
If Avaya endpoint is configured
RVSM-5252 with a Unicode name, the ECS
rejects the H.323 call
Tandberg MXP Series
QC#26201 interoperability issue when
placing SIP TLS calls.
When connecting to Polycom
RealPresence Immersive Studio
Polycom
Flex 6.1.2_06 the remote party
RealPresence
does not receive audio. This is
due to wrong capability
Solution/Workaround
Configure IPO with "MediaSecurity=None" to the
extensions associated to those endpoints to enable
presentation towards them.
Disable AES256 on XT or place outgoing call from
Cisco to XT.
For low bit rate calls (up to 256Kbits), set the
maximum call rate of the Codec Unit to 2M (the
same max. rate as MGC) in the Administrator
Settings > Call Preferences page.
For 384Kbit- 2Mbit calls: In the MGC Advanced
Properties page, deselect Auto Video Bit Rate.
Update LifeSize Express to latest version. As a
temporary alternative, disable G.722.1 from the
web interface by navigating to Administrator
Settings > Calls > Preferences > Audio
Disable H.264 High Profile on the Codec Unit.
Configure > Advanced > Preferences > Video
Disable H.264 High Profile on the endpoint.
Upgrade Avaya 1000-series endpoints to version 4.9
or higher.
Use a plain ASCII name for the Codec Unit.
Configure > Advanced > Protocols > SIP > TLS >
Enabled =No.
Disable G.719 on the Codec Unit.
Known Issues 125