Avaya CU360 Release Notes page 15

© 2021 Avaya Inc. All rights reserved
Figure 9: Small Keyboard Keys – Press once FN to switch between Yellow and White symbols.
Once the remote-control is paired with your Avaya CU360, the CU360 Video-collaboration
Application will usually receive the key events when it is in foreground and has the input focus.
Some keys will be received even if the app is not in foreground or does not have the input focus.
Please note that if the screen is split, the input focus must be assigned to the proper side of the
screen by clicking on it.
You can use the following shortcuts:
•
To show or hide a mouse pointer, press the 'Mouse' key.
•
To exit from a CU360 App page or from an app, press the 'Back' key
•
To Mute or Unmute the microphone in your device, use the 'Mute/Unmute' key when the
CU360 Video-collaboration Application or the Spaces App has the focus. Some third-party
apps could be able to manage mic mute as well.
•
To stop the device to transmit your video and presentation while in a meeting, press the
'Privacy' key ('Video Mute/Unmute'). You video image could be replaced with a synthetic
image.
•
To connect or disconnect the call in your device, use the corresponding keys when the CU360
Video-collaboration Application is in foreground. When the CU360 app is not in foreground,
pressing 'Connect' or 'Disconnect' keys on the remote will resume the app, if it is not hidden.
•
Short press the 'Power' key to put in standby (sleep mode) the system or to wake-up the
system (it could cause monitor off or monitor to automatically change channel, if more inputs
are connected to your monitor). While in a call, short pressing this key has no effect
•
Short press any key except 'Mouse' key to wake-up the system
•
Long press the 'Power' key to power-on the device, until you see the LEDs around the camera
alight
•
Long press the 'Power' key to power-off the device, until you see the "Power
off/Restart/Screenshot menu". Activate the mouse pointer on the remote-control and select
"Power off".
•
To switch between yellow and white symbols on the keyboard on the back of the remote-
control, press and release the FN key. Do not keep it pressed.
•
The 'Enable/Disable Tracking Camera' key (also named 'Voice Activation' key) toggles the
current camera tracking mode functionality while CU360 app is in foreground, or the track
speaker functionality for third-party apps using the camera.
•
The Zoom in/out keys zoom the local camera in any application using it.
•
To pan tilt the local camera in any application using the camera, activate the mouse pointer
and move the mouse while pressing the control far/near camera key.
•
If a computer is connected, pressing the control far/near camera key while the CU360 App is
in foreground activates the USB A/V Bar mode. Press again to exit from USB A/V Bar
Mode.
•
Release Notes for Avaya Collaboration Unit CU360
.
•
Important
When the mouse pointer is active, the ok button will not work as selection/enter on
the current control (the focused one), but only as a click/long click on the current
mouse pointer position.
Press OK while moving the mouse pointer to drag an item on the screen.
o
Long press OK while the mouse pointer is active to simulate a long click.
o
Avaya CU360 Setup and Control 15