Avaya CU360 Release Notes page 26

© 2021 Avaya Inc. All rights reserved
Figure 9: GUI > Control Camera Panel > Presets Button
While in the Presets page, you can zoom in/out the camera by pressing on the "plus" and minus"
icons, and you can pan/tilt the camera using the arrows. You can also use the remote-control keys
to PTZ the camera while in this page.
Once you move the camera to the desired position, you can save (store) the current position in a
preset. The stored preset can be recalled any time to move again the camera in the saved
position. Assigned presets are visible as numbers within light-blue circles. Not assigned presets
are dark.
Figure 10: GUI > Control Camera Panel > Camera Presets Page
Store a preset using the remote-control keys: press the corresponding number on the remote-
control keyboard. The circle with the number will blink. Pan/tilt/zoom the camera, and press enter
when done. The circle color will become light blue.
Store a preset using a mouse pointer: Adjust the camera, then long click on the circle with the
number you want to reserve for the preset. The circle will become light blue.
Delete an assigned preset using the remote-control keys: press the corresponding number on
the remote-control keyboard. The circle with the number will blink. Press the delete key on the
remote-control to unassign the preset. The circle color will become dark.
Recall a preset using a mouse pointer: Click on the circle with the desired number.
From the GUI, you can assign and recall up to 10 presets.
How to store or recall a preset - Web
To store or recall presets positions for the near camera on the device Web interface, go to
[W
While in the Cameras Control page, you can zoom in/out the local camera by pressing on the
"plus" and minus" lens icons, and you can pan/tilt the camera using the arrows inside the Move
panel.
Release Notes for Avaya Collaboration Unit CU360
] [A L ] M A
EB DMIN OGIN ORE CTIONS
>C C
ONTROL AMERA
Avaya CU360 Setup and Control 26