How To Start The Cu360 Application; Cu360 App Floating Dock Bar - Avaya CU360 Release Notes

© 2021 Avaya Inc. All rights reserved
You can also press Disc on the remote-control to restore the app to Foreground mode, but only if
the app is in a call.
Figure 86: Switching between Overlay and Fullscreen Modes

How to Start the CU360 Application

By default, the CU360 App starts maximized (Full Screen) every time the device is booted up.
You can change the start mode of the application or decide that a different application must be
automatically launched when CU360 starts.
CU360 App Configurable Start Mode
You can configure the CU360 App to start in several ways
[G
[W
•
•
Figure 87: Application Start Mode
•
•
•

CU360 App Floating Dock Bar

When the CU360 App is in the foreground (has the focus), a floating dock bar is accessible in any
page for common actions and to navigate to previous pages. When in a call, a hotdog icon (three
lines) in the dock bar can be used to activate the call panel.
Release Notes for Avaya Collaboration Unit CU360
] C > A > S
UI ONFIGURE DVANCED YSTEM
] [A L ] A
EB DMIN OGIN DMINISTRATOR
Start Mode:
Full Screen*: the CU360 app starts and shows its UX full screen (or in the
o
available space if the screen is split)
Iconized: the CU360 app starts minimized. A floating icon is visible on the
o
screen When this option is active, Kiosk/Restricted mode is disabled (and the
reverse)
Hidden: the CU360 app starts without any visible floating icon on the screen.
o
When this option is active, Kiosk/Restricted mode is disabled (and the
reverse) [2].
Iconized starting application: same as Iconized, but also launching an
o
additional application you can choose from a list of installed apps [1].
Hidden starting application: same as Hidden, but also launching an additional
o
application you can choose from a list of installed apps [1].
Application to Start: additional application to start that you can choose from a from a list of
installed apps [1].
Important
[1] The app to launch cannot be chosen through the Web interface in this release.
[2] When configured as hidden, the CU360 app will not react to any event (ScreenLink
connections, Avaya AVGrabber plugged, calendar events, ...). Only incoming calls and
software upgrades initiated remotely will automatically restore the app to foreground.
> C
USTOMIZATION
S > S > C
ETTINGS YSTEM USTOMIZATION
>
The CU360 Video-collaboration Application 76