Instrument Setup; Unpacking Instructions - Ametek iPac User Manual

Instrument Setup

Unpacking Instructions

Great care has been taken to deliver your iPac Pachymeter to you. The packaging
was specifically designed to transport this instrument. Please retain the packaging for
future use in case transportation is required.
Removing the iPac Pachymeter
1. Lift the insert that contains the Carrying Case and
iPac Charging Cradle out of the box.
2. Unfold the insert and slide the Carrying Case and
iPac Charging Cradle out of the insert.
3. Open the carrying case, remove the User's Guide
and read the instructions carefully.
4. Remove the iPac from the case, and charge the
instrument according to the Charging the iPac
Pachymeter section.
5. Store the box and insert in a safe place so that if it
is needed for future shipping, it will be available.
The items listed below should be included in the iPac
Pachymeter packaging:
• Carrying Case
• iPac Pachymeter
• Lanyard
• Tip Cover
• User's Guide
• Battery (in the iPac)
• A/C Adapter w/ Mini USB
• iPac Pachymeter Charging Cradle
Note: If any of these items are missing, please contact the Reichert Customer
Service Department. Contact information can be found on the back cover of
this User's Guide.
10
Shipping Box
Carrying
Case
iPac Charging Cradle
Insert
Shipping Box & Insert
16040-101 Rev. J