Safety Instructions; Technical Specifications - Extreme Networks ExtremeSwitching ISW Series Quick Installation Manual

Safety Instructions

When a connector is removed during installation, testing, or servicing, or when an energized fiber is
broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending
on the laser output power.
The primary hazards of exposure to laser radiation from an optical-fiber communication system are:
•
Damage to the eye by accidental exposure to a beam emitted by a laser source.
•
Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.

Technical Specifications

Model
Ethernet
Copper RJ45 Ports
SFP (pluggable Ports)
Fiber port connector
Power
Power input
Input voltage range
Maximum Power
consumption
Environmental and Compliances
Operating temperature
Storage temperature
Humidity
Mechanical
Ingress protection
Dimension
(without DIN rail clip)
Weight
Installation option
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide
ISW
10/100/1000 Mbps speed auto-negotiation MDI/MDIX Auto-crossover
100/1000Base SFP slot
LC typically for fiber (depends on module)
Redundant Input Terminals; Reverse power protection
12-58 VDC (with POE: 46-58 VDC)
Without PoE (Power over Ethernet): 14 Watts
With PoE: 265 Watts
-40 to +75°C (cold startup at -40°C)
-40 to +85°C
5 to 95% RH (non-condensing)
IP30
154mm(H) x 128mm(D) x 77mm(W)
1410g
DIN-Rail mounting Wall mounting
Industrial Series Switch Overview
8