Standards And Environmental Data; Half-Duplex To Full-Duplex Converter Technical Specifications - Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual

Technical Specifications

Standards and Environmental Data

Table 66: Safety Standards
North American Safety of ITE UL 60950-1 2nd Ed., A2:2014, Listed Device (US)
European Safety of ITE
International Safety of ITE
Table 67: V400 Environmental Data
Operating conditions

Half-Duplex to Full-Duplex Converter Technical Specifications

The Half-Duplex to Full-Duplex Converter can be attached to switch ports to enable communication
over half-duplex connections with older Ethernet devices.
Order the converter using one of the following part numbers:
•
10958: HDX to FDX Converter, Rest of World
•
10959: HDX to FDX Converter: North America
Other specifications:
•
8.8 Gbps switching capacity
•
4 priority queues
•
192Kb packet buffer
Table 68: Half-Duplex to Full-Duplex Converter Packaged Dimensions
Height
Width
Depth
Weight
CSA 22.2 #60950-1-07 2nd Ed., 2014-10 Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
EN 60950-1:2006 +A11+A1+A12+A2
EN 60825-1:2007 (Lasers Safety)
IEC 60950-1:2005 2nd+A1:2009+A2:2013
2014/35/EU Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2005 2nd Ed. + National
Differences
AS/NZX 60950-1 (Australia /New Zealand)
Temperature: 0°C to 50°C (32°F to 122°F) for non-PoE models
Temperature: 0°C to 45°C (32°F to 113°F) for PoE models
Storage and transportation temperature: -40°C to 70°C (-40°F to
158°F)
Humidity: 5% to 95% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,850 feet)
2.69 cm (1.06 in)
12.9 cm (5.08 in)
6.91 cm (2.72 in)
200 g (0.44 lb)
ExtremeSwitching 5520 Series Hardware Installation Guide
Standards and Environmental Data
141