Table of Contents
Advertisement
It is recommended that you give it a service during the winter
so that your dealer can analyse the history of your robot mower
ETM105 via a connection to a laptop. If the maintenance contract
stipulates it, please get in touch with your dealer in order to arrange
an annual maintenance check.
7•5 CUTTING BLADES
The blades are the main components that ensure optimal cutting.
It is recommended that they are checked at least once a month and
replaced when they are too used or broken.
WARNING!
The two left trays turn in a clockwise
direction, the three right trays turn in an anti-clockwise
direction.
For one season, you will need two sets of blades (ref. 33346). It is
recommended that they are changed at the beginning of the season
and during June (the grass is thicker at that time).
To change a blade (machine off, equipped with protective gloves),
bring the hole of the protection disc to face the fixing screw of
the blade to change (see picture 10b). Unscrew the screw with a
FLATHEAD screwdriver (see picture 10c). When the screw has
been removed, take the blade, incline it and remove the blade
carefully (see picture 10d). Take your new blade and carry out the
opposite operation screwing it in properly.
If you have doubts about how to do it or about the fixing of one of
your blades, do not hesitate to contact your dealer.
7•5•1 CHANGING THE CUTTING BLADES
PROGRESS
MEANINGS
1.
Machine OFF, protective gloves
2.
Straighten the machine
3.
Put the hole of the disc opposite the screw
head of the blade
4.
Unscrew the blade
5.
Remove the component from its support
6.
Insert the new component and screw it in
7• MAINTENANCE
7•6 SPARE PARTS OF THE ROBOT
MOWER ETM105
7•6•1 THE CUTTING BLADES KIT
Around two sets of cutting blades are necessary during the season.
It is therefore important to change the blades once at the beginning
of the season and a second time in around June. When the cutting
blades are subjected to harder work (such as branches, gravel, etc.),
it is strongly recommended that the blades are checked and changed
more frequently.
(33346: set of 15 cutting blades) (see picture 13).
7•6•2 THE BATTERY KIT
The normal duration of a set of batteries is 4 to 5 years. A battery
management system regularly checks their status.
Ask your dealer to check the status of the batteries during each
maintenance check. The manufacturer guarantees the batteries for
two years.
During replacement, the full set of batteries must be changed
(33478: battery kit) (see picture 12).
PLEASE GO TO YOUR LOCAL DEALER FOR ALL
SPARE PARTS ORDERS.
Ref
33346
33478
33358
33309
Recommendation of the
Pieces
cycle of the spare parts
Cutting blades
2x per year
Battery pack ETM105
5 years
Silent rear block kit
1x per year
ETM105
Silent front block
1x per year
ETM105
Wheel check
1x per year
Maintenance
1x to 2x per year
35
Advertisement
Table of Contents
