Table of Contents
Advertisement
Example 1 : The robot rests from 9pm on Monday and starts
working again the following day at 6am.
Rest range
1# : 21 : 00 → 24 : 00
Mon □Tue □Wed □Thu □Fri □Sat □Sun
Rest range
2# : 00 : 00 → 06 : 00
□Mon
Tue □Wed □Thu □Fri □Sat □Sun
Example 2 : A two-hour rest period every night during the week
starting at 11pm because an automatic sprinkler system is in use.
Rest range
1# : 23 : 00 → 24 : 00
Mon
Tue
Wed
Rest range
2# : 00 : 00 → 01 : 00
□Mon
Tue
Wed
- The "Debug-info" menu displays the time, phase information or
position of the robot with respect to the perimeter wire.
PROCESS
MEANINGS
1.
Indication Menu (C to return to the Menu)
F3
2.
Press the
Indication of the phase in the middle of the screen and technical
information instead of the time (see the Options menu "O08-PhiInv" to
set phase parameters).
PHASE
Ф +
: Machine within its mowing area
Ф -
: Machine outside its mowing area
4•6•2 MENU "INFOS"
This menu is addressed to your technician. It includes 4 submenus:
- The "Statistics" menu enables general information about the
operation of your robot mower ETM105 to be displayed.
CODES
MEANINGS
S0
Mowing time (minutes)
S1
Charging time (minutes)
S2
Total number of cycles
S3
Left wheel distance (metres)
S4
Right wheel distance (metres)
S5
Battery status
S6
Battery status
S7
Rest time (minutes)
- The "History" menu enables the events recorded by the robot
mower ETM105 to be displayed.
CODES
MEANINGS
S
Begin seeking station
Wc
Begin working
Cw
Begin charge
Rc
Begin rest on charge
→U
Panel opened by user
4• OPERATING INSTRUCTIONS
Thu
Fri □Sat □Sun
Thu
Fri
Sat □Sun
key
CODES
MEANINGS
→Go
Start to work
ON
Switched on
─ ─
Switched off
AL
Alarm
NP
New program (upgrade)
- The "Version" menu enables the robot mower ETM105
software version to be obtained.
- The "Serial" menu enables the serial number of the main
electronic card to be displayed.
4•7 SUMMARY
4•7•1 TO START UP THE MACHINE
Use the following procedure to switch on the robot:
a. Lift the access hood of the robot.
b. Move the main switch to
c. Press the
key on the control panel. The screen will light up.
d. Press the
key on the control panel a second time. The screen
will flash.
e. Close the access hood in the next 8 seconds. The robot will start.
4•7•2 TO STOP THE MACHINE
To switch the robot off, simply raise its hood.
It will start working again only when you implement the procedure
described above.
4•7•3 TO SEND THE MACHINE TO ITS
STATION
If you want the robot to continue mowing after it has recharged:
a. Stop the machine by raising the hood.
b. Press F1. The screen will display: "O01 GoToChge: √ "
c. Press
to start the robot again.
d. Close the hood in the next 8 seconds.
4•7•4 TO SEND THE MACHINE TO ITS
STATION AND STAY THERE
If you want the robot to remain at the charging station until further
notice:
a. Stop the machine by raising the hood
b. Press F2. The screen will display: "O02 Stay@Chge: √"
c. Press
to start the robot again.
d. Close the hood in the next 8 seconds.
To cancel the option on the terrain, repeat the operation
and when you reach point b press "#" to cancel the option,
indication O02 Stay@Chge: -
4•8 USE OF THE ROBOT MOWER
ETM105: VARIOUS
4•8•1 SOUND AND VISUAL INDICATIONS
During the various operations, your robot mower ETM105 indicates
its status to you by small "beeps" and/or by information on the
display screen.
.
23
Advertisement
Table of Contents
