Etesia ET MOWER ETM105 Original User Manual page 38

Table of Contents

Advertisement

PROBLEMS
Machine Alarm Indication:
"Wheel slipping"
Machine Alarm Indication:
"Wire lost"
Machine Alarm Indication:
"Lifted"
The machine stays at its
station for a long time and
does not leave it again
Keyboard disabled
38
8• TROUBLESHOOTING
SITUATION
The machine travels an abnormal distance in
comparison with the terrain without finding its
peripheral wire.
When returning to the charging station, the machine
has not found the field of its peripheral wire.
Someone has lifted the robot while it was working.
The robot has sensed a difference in height because of
an anomaly on the ground.
The machine has nothing left to mow and stays at the
station.
The machine has been put back in its charging station
manually and cannot start itself up on its own.
The robot is resting during a programmed rest period.
The robot is not working as its battery temperature is
too high or too low. This helps to avoid damage to the
batteries or the land being maintained.
Option O02: "Stay@Chge" has been selected.
The keyboard was disabled by option 18.
The keyboard is defective.
SOLUTION
Check that there are no muddy areas in the machine's
path.
The number of metres of peripheral wire encoded in
the machine is fewer than the reality: contact your
dealer.
If necessary consult your dealer.
Contact your dealer.
This alarm has been activated for safety reasons.
Simply restart the robot.
Fix the problem on the ground so that the robot no
longer detects an anomaly.
If necessary consult your dealer.
Check whether the machine display mentions SC
(Slow Charge) the machine starts its cycle when
necessary.
Send the machine back to the station via the menu
option (F1). The machine return to its station and
start its cycles again.
This situation is normal. The robot will continue its
work cycle again when necessary.
This situation is normal. The robot will continue its
work cycle again when necessary.
To restart the robot, press
If necessary consult your dealer.
Press the 0 key for 5 seconds.
Contact your dealer.
If necessary consult your dealer.
.

Advertisement

Table of Contents
loading

Table of Contents