Usual Distances - Etesia ET MOWER ETM105 Original User Manual

These distances are used in several cases. Every terrain is different and it must be kept in mind that different constraints are found in each case.
During set up, the installer must work as follows:
→ OBSTACLES:
2•1 LOCATED MORE THAN 1 M FROM THE EDGE OF THE TERRAIN: 2 SOLUTIONS
- Either the wire passes normally: see distances above.
- Or the wire passes in front of the obstacle (the small plot behind the obstacle will not be mowed).
2•2 LOCATED LESS THAN 1 M FROM THE EDGE OF THE TERRAIN: THE WIRE PASSES
IN FRONT
-
Minimal mowing area (for demonstration): 15 m x 15 m (≈ 2 hundred metres squared).
- Passage: minimum distance of 5 m between the wires.
- It is worth ensuring a minimum distance of 15 m. between the peripheral wires when they are opposite each other (//) in front of the station.
Outside area
Lawn
Peripheral wire
6
2• USUAL DISTANCES
Reminder:
- length of mowing: 105 cm;
- length of machine: 120 cm.
Charging station: distance of 65 cm
1. Begin setting up the wire from the charging station.
2. Position the wire in a clockwise direction.
3. Position the peripheral wire of an island in an anti-clockwise direction.
4. The cable is positioned between 2 and 5 cm deep.
Generally: 60 cm from the boundary
Terrain
boundary
Cross-section view
Edges, terraces, hollows: 65 cm
Terrace
Cross-section view
Paths, flowerbeds, at lawn level : between 30 and 50 cm
Path
Cross-section view
Plan view Plan view
ETM105
Lawn
60 cm
Wire
Lawn
65 cm
Wire
Lawn
Flowerbed
50 cm
30 cm
Wire
Min 15 m
Min 5 m
Min 200 m²