Table of Contents
Advertisement
3• USING TEXT MESSAGES TO CONTROL
3•7 ALARM_SMS
The GPS/GPRS module is sending Alarm_SMS to the 'ALARM_
PHONE' and the 'ALARM_PHONE2' only. The events causing an
Alarm_SMS are:
- All the same alarms as the ones reported on the robot display
(examples : Battery Discharge, No Wire Signal, Blocked Head, No
Station Found,... ). The complete list of those alarms can be found
in the manual of your mower.
- Robot switching off after manual operation or after a 15' period of
keyboard inactivity.
4• USING 'TRACK&TRACE' SERVER ON THE WEB
4•1 ACCESSING THE 'TRACK&TRACE' SERVER
Go on following address: https://www.positionviewer.com and enter
your account user name and password.
46
THE GPS/GPRS MODULE
- Security threat detection: robot leaving the zone defined by the
virtual fence (see section 3•6) or GPS/GPRS module detecting
abnormal move (speed >10km/hr or distance between initial
position (module start) and current position > 1000m).
The system is filtering the 'Alarm_SMS' in order to avoid useless
SMS to be sent and reduce the cost of communications: when the
same alarm type is repeated successively (no other kind of alarm in
between) and the robot has not been switched off/switched on, no
new SMS is sent.
Text message alarms give information about the reason for the alarm and
the robot's current GPS position, as shown on the example above.
These are identical to those of the old portal.
Username
Or e-mail*
Password*
Forgot Password?
Add module
Advertisement
Table of Contents
