Table of Contents
Advertisement
FIG 2 :
C
6•7•1 TOPMENU
The topmenu is the menu displayed when you switch on the robot.
You can also return to the top level menu by pressing the
several times (as many times as necessary).
The topmenu is identified by the message "Menu" and the date
programmed in the robot.
6• MULTIZONE OPTION
*13870
C
#
*13870
C
#
*13870
C
#
*13870
C
#
button
C
The topmenu contains four possible different screens (see figure 2)
and you press the
button to move from one screen to another.
F3
The four possible screens are:
"Global menu" identified by the presence of the time.
Menu
27,2
"Menu Zone A" identified by the characters "Aɸ"
"Menu Zone B" identified by the characters "Bɸ"
"Menu Zone C" identified by the characters "Cɸ"
Menu
27,2
CΦ+ 003:210
!!! If option "0016 Multizone" is not activated, only "Global Menu"
and "Menu Zone A" are visible. Option O016 can be activated from
the "Global Menu".
6•7•2 GLOBAL SUB-MENU
When the "Global menu" is displayed, you can:
Display and modify the global user parameters (in fact, only P005 is
global) by pressing the keyboard sequence
character if you wish to change the parameter display and modify
global options (1
table § 6•5) by pressing the keyboard sequence
st
then selecting the option with buttons
###
then pressing the
#
character to change the setting for the option.
Display the robot's operating data:
#F3
- "Data" sub-menu:
• Use
F2
and
F3
to access the "Statistics", "History", "Version"
or "Serial no." sub-menus and enter the sub menu by pressing
Display and modify the robot settings:
-
"Settings" sub-menu:
#
• Use
and
F3
to access the "Options", "Clock", "New
F2
code", "Language", "Suppress Rests" and "Rests settings"
sub-menus and enter the sub menu by pressing
Note: as the programmed rests are specific to each zone, it us not
possible to modify them from the Global sub-menu. You need to
access them from the specific sub-menu for the zone for which you
wish to program the rest time.
6•7•3 MENU ZONE X (X=A, B OR C)
From the zone X menu (identified by "Aɸ", "Bɸ" and "Cɸ" respectively
for zones A, B and C), you can:
Display and modify the user parameters specific to this zone by pressing
the keyboard sequence
*13870
modified using buttons
or
F2
modify the setting for a parameter.
tu 19/02
13:24
tu 19/02
and the
*13870
F2
or
F3
.
#
, then selecting the parameter to be
and pressing the # character to
F3
#
and
.
#
33
Advertisement
Table of Contents
