Display And Key Pad - Automation Direct ProSense DPM2 Series User Manual

User Manual - DPM2 Series Process Panel Meters

Display and Key Pad

Pro mode is when configuration menu is entered to program the indicator. RUN is the
normal mode in which display shows the reading according to configuration and input signal
value.
2
3
# Description
4 digit display Red Shows value according to
1
2 Minus sign
3 Key Pad
4 Setpoint 1 LED
5 UP key
6 SHIFT key
7 DATA/ENTER key Changes to PRO mode.
8 Setpoint 2 LED
Free space for
9
units label
12
UP SHIFT
1
4
5 6
Programming Panel
Run Mode
configuration.
Illuminates for negative
readings.
---
Illuminates when setpoint
1 turns active.
No application
Displays maximum and
minimum stored values.
After 3s of pressing, sets
maximum and/or minimum
memorized value to
current display value.
Illuminates when Setpoint
2 turns active.
---
DPM2 Process User Manual, 1st Edition
DATA
2
ENTER
7 8
Programming Mode
Shows steps and data during configuration.
Illuminates for negative values.
---
Illuminates when setpoint 1 turns active.
Shows setpoint value. Increases value of active
digit.
Shifts active digit to the next right digit.
Validates selected data and parameters.
Moves one step forward in configuration menu.
Changes to RUN mode.
Illuminates when Setpoint 2 turns active.
---
1
9