Probes
Peripherals
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Follow these guidelines before connecting a probe to the
Ultrasound system:
•
Inspect the probe prior to each use for damage or
degradation to the:
•
housing
•
cable strain relief
•
lens
•
seal
•
connector pins
•
locking mechanism
•
Do not use a damaged or defective probe.
•
Never immerse the probe connector or adapter into any
liquid.
Refer to the Patient Safety Environment section of the User's
Manual for peripheral isolation information.
Safety considerations
1-19