Contents in this manual
Chapter
Chapter title
number
Introduction
1.
Site preparations
2.
System Setup
3.
General Procedures
4.
and Functional
Checks
Components and
5.
Functions (Theory)
Service Adjustments
6.
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
This manual provides installation and service information for the
LOGIQ V2/LOGIQ V1 Ultrasound system. It is divided in ten
chapters as shown below.
The manual is divided into ten chapters.
In the beginning of the manual, before chapter 1, you will find
the Revision overview, the Important precautions including
Translation policy, Damage in transportation, Certified electrical
contractor statement, Omission & errors, Service safety
considerations and Legal notes, and the Table of Contents
(TOC).
An Index has been included after Chapter 10.
Table 1-1:
Contents in this manual
Description
Contains a content summary and warnings.
Contains pre-setup requirements for the LOGIQ
V2/LOGIQ V1.
Contains setup procedure with procedure
checklist for the system.
Contains functional checks that must be
performed as part of the installation, or as
required during servicing and periodic
maintenance.
Contains block diagrams and functional
explanations of the electronics.
Contains instructions on how to make any
available adjustments to the LOGIQ V2/LOGIQ
V1.
Manual Overview
Manual Overview
1-3