Table of Contents
Advertisement
Software Upgrade Procedure (For R1.1.x) (continued)
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
5. If the Load the complete disk is selected.
•
For R1.0.x, read the information in the Confirmation
dialogue box carefully and check the boxes before
Preset, Patient data and BIOS to confirm that the
requirements have been executed. Then input the
Installation Password: GEWuXiChina. Select Execute
to continue.
Figure 7-16. Input Password between R1.0.x
Loading the software
7-29
Advertisement
Table of Contents
