UP-D897 Printer Installation
Tools
Manpower
Preparations
Installation Procedure
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
No special tools needed.
One person 5 min.
1. Unpack the UP-D897 Printer.
1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to LOGIQ V2/LOGIQ V1 USB port.
Figure 3-12. UP-D897 connection
5. Refer to the Connectivity configure steps of 'Sony
UP-D25MD Printer Installation' on page 3-22.
Peripherals Installation
3-27