Replacement Procedures
Wipe Tool (continued)
NOTE:
NOTE:
7-36
4. For R1.0.x software, select 2. Wipe Tool and then select
Next to continue.
For R1.1.x software, select Wipe tool.
All patient data cannot be recovered after this operation.
Contact GE service for support.
All patient data (if any) will be destroyed! Please backup
patient data before executing erasing patient data!
Figure 7-24. Upgrade USB message (For R1.0.x)
Figure 7-25. Upgrade USB message (For R1.1.x)
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10