Table of Contents
Advertisement
System Setup
Footswitch Installation (continued)
Configuring Footswitch
3-30
Footswitch supports these configurations: No Function, Freeze,
Next Heartcycle, Prev Heartcycle, Print1, Print2, Update, Next
Step (Scan Assistant), Previous Step (Scan Assistant), Scan
Assistant pause/Resume.
Enter Utility -> Application-> Settings to configure the
Footswitch functions.
Figure 3-15. Configuring Footswitch Functions
LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Advertisement
Table of Contents
