Resetting The Avaya Virtual Services Platform 9000 - Avaya Virtual Services Platform 9000 Installation Manual

Chassis operations
b. Wait for the response that indicates it is safe to remove the device.
c. Physically remove the device.
Example
Unmount and remove the USB:
VSP-9012:1>enable
VSP-9012:1#usb-stop
It is now safe to remove the USB device.
VSP-9012:1#extflash-stop
It is now safe to remove the external Compact Flash device.
Next steps
No restrictions or requirements exist before you can reinsert a USB or external Compact Flash
device. You can insert these devices at any time and Virtual Services Platform 9000 automatically
recognizes them. The devices are accessible within seconds after insertion.
After you insert the external Compact Flash, enable logging to the external Compact Flash with the
logging logToExtFlash command.
Additionally, you can enable the following features as required:
• PCAP
• debug-config file or trace-logging flags

Resetting the Avaya Virtual Services Platform 9000

Reset the Avaya Virtual Services Platform 9000 to restart the hardware without cycling power.
Procedure
On the CP module, press Reset.
The following figure shows the location of the recessed Reset button.
October 2015 Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
96