Table of Contents
Advertisement
Virtual Services Platform 9010 chassis
Lifting the chassis
The Virtual Services Platform 9010 weighs in excess of 141 lb (64 kg). Each chassis requires a
minimum of three people to lift. Always use a mechanical lift when one is available.
Use the handles that swing out from the top and bottom of the chassis sides to lift the chassis. To
use the handles, swing the handle up and out from the chassis. From the rear, lift the chassis from
the bottom only.
Before you begin
Reduce the weight of the chassis as much as possible before you lift it. Always use a mechanical lift
when one is available. Ensure you have at least three people to lift the chassis. Use two people to
lift the chassis at the sides and a third person to support the chassis from behind the rack, as you
position the chassis on the shelf and hold it in place. Take care to lift the chassis from the bottom.
Procedure
1. Use the recessed handles at the top and bottom of the chassis sides to lift the chassis. To
use the handles, swing the handle up and out from the chassis.
2. From the rear of the chassis, lift the chassis from the bottom only.
October 2015
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
34
Advertisement
Table of Contents
