Avaya Virtual Services Platform 9000 Installation Manual page 31

3. Place the installation shelf at the mark on the rack, inside the rails. Hold the installation shelf
in position, and then align the mounting rail with the two holes on each side of the vertical
rack support.
4. Insert a Phillips screw through each installation shelf mounting hole and into the
corresponding hole in the rack.
5. If using hex nuts, add a nut to each screw, and then tighten using a hex wrench.
6. Tighten each screw with a Phillips screwdriver.
October 2015
Virtual Services Platform 9010 chassis installation
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
31