Table of Contents
Advertisement
Virtual Services Platform 9010 chassis
Installing the installation shelf
The installation shelf is an optional item used for installation of the chassis in a rack. You can mount
a chassis on top of another Virtual Services Platform 9000 chassis instead of using the installation
shelf.
Procedure
1. Use the rail guides provided at the top and bottom of the installation poster to identify where
you want the chassis bottom to rest, and then mark that location and the location of the rail
guide holes on the front of the rack. Start at the bottom of the rack and install subsequent
chassis above it.
Note:
Fold or trim off the margins of the poster to help mark the rack.
2. If the holes in the vertical supports require clip nuts, insert a clip nut in each of the 14
locations where you mark the holes. Avaya includes clip nuts. If necessary, use the clip nuts
for your specific rack model.
October 2015
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
30
Advertisement
Table of Contents
