iPBX30 User Manual
9.3.2.2 Configuring DoS Settings
To configure DoS settings, follow the instructions below:
1. Click on Firewall / NAT ->Settings menu to open the Firewall
General configuration page.
2. Check or uncheck individual check box for each type DoS
protection.
3. Click Apply to save the settings.
Figure 9.3. Firewall General Configuration Page
9.4
ACL Rule Configuration Parameters
9.4.1 ACL Rule Configuration Parameters
The table below describes the configuration parameters firewall
inbound, outbound and self-access ACL rules.
Chapter 9
69