Figure 9.5 Acl Configuration Example; Figure 9.6 Sample Acl List Table - Asus iPBX30 User Manual

iPBX30 User Manual
7. Make changes to any or all of the following fields: source/
destination IP, service, time and log.
8. Assign a priority for this rule by selecting a number from the
Move to drop-down list. Note that the number indicates the
priority of the rule with 1 being the highest. Higher priority rules
will be examined prior to the lower priority rules by the firewall.
9. Click on the Add button to create the new ACL rule. The new
ACL rule will then be displayed in the inbound access control list
table at the bottom half of the Inbound ACL Configuration page.
The figure below illustrates how to create a rule to deny outbound
HTTP traffic originated from the host w/ IP address 192.168.1.129.
Figure 9.5. ACL Configuration Example
Figure 9.6. Sample ACL List Table
Chapter 9
75