Table of Contents
Advertisement
iPBX30 User Manual
• Operator access number
Assign the code for accessing operator, for example "0" or "9",
so the extensions can dial this access code to call the operator.
• Operator type
Assign the operator type as a single extension or a group of
extensions. If the operator type is "Group", all the extensions
defined in operator group rings when the operator code is
dialed.
• Operator extension
Assign a single extension number here as the operator.
• Operator extension group
Select all the operator extension numbers if operator type is set
as "Extension group".
• External prefix digits
Define the outbound call (call to PSTN) access prefix code. It
is associated with "local" privilege in Extensions configuration
page. Do duplicate with other access code that is already used.
• IDD prefix
Define the "International Direct Dial" prefix code for call privilege
control checking. It associated with "International" privilege in
Extensions configuration page. When an extension is limited
and not able to make international long distance call, the server
will check the dialing number from extension with this IDD
prefix, and the call will be denied if the prefix matched.
• DDD prefix
Similar with above, this field allows user to define the "Domestic
Direct Dial" prefix code for call privilege control checking.
It is associated with "National Long Distance" privilege in
Extensions configuration page.
• External trunk gateway IP
Enter the gateway IP for IDD, DDD and outbound call access.
Chapter 12
119
Advertisement
Table of Contents
