Service Restart; Configuring Examples; Figure 12.12 Typical Ipbx30 Application Set Up - Asus iPBX30 User Manual

Chapter 12

12.6.2 Service restart

If you need to restart the IP-PBX server software, click this item
and confirm. The iPBX30 will kill the old IP-PBX program task
to restart it again. Your request for IP-PBX service restart won't
affect the NAT function of iPBX30.
12.7 Configuring Examples
The diagram below shows a typical iPBX application scenario, and
the iPBX30 plays the role of router and SIP server at the same
time. Following sections describe how to setup 2 ATA in LAN, 1
ATA in internet and 1 SIP gateway in LAN. We have to give some
assumption for these scenarios:
• iPBX30 WAN public IP: 210.80.66.110
• DHCP server is enabled for iPBX30 LAN, and LAN IP segment
is 192.192.1.x
• Two AX-112 ATA in LAN with extension number 1001/1002, and
the AX-112 WAN is in DHCP client mode, this means AX-112
will get IP from iPBX30 built-in DHCP server.
• One AX-112 ATA in Internet with extension number 1003, and
its WAN IP is 192.168.10.10 which is obtained from the home
router.
• One SIP gateway connected to PSTN lines with LAN
IP:192.192.1.10.

Figure 12.12 Typical iPBX30 application set up

130
iPBX30 User Manual