Chapter 11
3. Click on Apply button to save the new password.
11.2.2 Configure System Settings
Follow the steps below to modify the system settings:
1. Click the Router Setup ->Administration menu to open the
System Administration configuration page.
2. Clone the MAC address for WAN
a) If you had previously registered a specific MAC address with
your ISP for Internet access, check the Clone WAN MAC check
box and enter the registered MAC address here.
3. Allow Administration from WAN: check or uncheck the check box
to enable or disable remote management via WAN port.
4. Allow Ping Interface: This option allows user to control access
to the router using ping via the LAN or WAN ports. Check the
respective check box to enable ping from the respective interface.
5. Click on Apply button to save the settings.
11.3
Viewing System Information
System Information page displays whenever you log into iPBX30.
You may also click on the Status menu to see the system
information. This page shows information of the overall system
settings.
96
iPBX30 User Manual