Page 1
UP-GWS01 Gateway System for UP-CHT01 User’s Manual 2 Last Updated: February 14, 2019...
Page 2
Copyright Notice This document is copyrighted, 2019. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
Page 3
Acknowledgment All other products’ name or trademarks are properties of their respective owners. Microsoft Windows is a registered trademark of Microsoft Corp. Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation Core, Atom are trademarks of Intel Corporation ...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity UP-GWS01 If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
Page 5
About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the AAEON.com for the latest version of this document.
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
Page 7
If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Page 10
China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Main Board/ Daughter Board/ Backplane Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
Specifications System Intel® Atom™ x5-Z8350 Processor (2M Cache, 1.44 GHz up to 1.92 GHz) CPU with 64 bit architecture; Quad Core Onboard DDR3L memory Memory Intel® HD 400 Graphics ,12 EU GEN 8, up to Graphics 500MHz Support DX*11.1/12, Open GL*4.2, Open CL*1.2 OGL ES3.0, H.264, HEVC (decode), VP8 Onboard eMMC...
Page 14
Environment 5V/4A DC Only Power 95mm x 91mm x 37mm (WxLxH) Form Factor — Gross Weight 32°F ~ 104°F (0°C ~ 40°C) Operating Temperature 0% ~ 90% relative humidity non-condensing Operating Humidity CE/FCC Class A Certification Windows® 10 OS Support Linux Android 6.0 Windows®...
List of Jumpers and Connectors Please refer to the table below for all of the board’s jumpers that you can configure for your application Label Function Power BT Power Jack Input HDMI connector USB 3.0 OTG RJ45 Ethernet connector USB 2.0 connector USB 2.0 connector Antenna Antenna...
Driver Download and Installation Step 1 – Download the drivers Click Driver tab in the Downloads section of UP page of AAEON website at: http://www.aaeon.com/en/p/up-board-computer-board-for-professional- makers#downloads Download the Step 1 - Chipset and peripherals Driver, Step 2 - TXE Driver, Step 3 - LAN Driver and Step 4- Dummy driver (Manual) and open the self-extracting EXE files.
Page 21
Open the Setup.exe file in the folder Follow the instructions Drivers will be installed automatically Step 4 – Install Dummy Driver* Open the Step4 - Dummy Driver (Manual) folder Extract the UP_DDriver.rar file to a new folder Open the Install_Dummy_Driver_on_UP.docx file in the new folder Follow the instructions to manually update the driver * Some virtual devices required for Linux to function properly will appear as unknown devices in Windows Device Manager.