iPBX30 User Manual
2.4.2 Rear Panel
The rear panel contains the ports for the unit's data and power
connections.
Figure 2.2 Rear Panel Labels and Connectors
Table 2.3 Rear Panel Labels and LEDs
Connector
6
1--4
WAN1 and
7
WAN2/DMZ
8
USB
9
Console
10
RESET
11
POWER
Indication
LAN Ports: connect to your PC's Ethernet
port, or to the uplink port on your LAN's hub/
switch, using the Ethernet cable.
Dual WAN ports or 1 WAN + 1 DMZ:
connects to your WAN devices, such as
ADSL or cable modem or DMZ network. The
DMZ network must be connected to the port
labeled as WAN2/DMZ.
USB Ports: connect to USB 1.1 OR 2.0
devices
Not supported.
Reset Button:
1. Reboot the device
2. Reset the system configuration to factory
defaults if pressed for more than 5 seconds.
Power Input Jack: Connect to the supplied
AC adapter.
Chapter 2
9