Setting Up Wan Load Balancing; Figure 5.8 Load Balancing Configuration - Asus iPBX30 User Manual

iPBX30 User Manual
Setting
C o n n e c t i v i t y
Check (Cont.)
C o n n e c t i v i t y
Check Interval
C o n n e c t i v i t y
Check IP Address
(WAN1)
C o n n e c t i v i t y
Check IP Address
(WAN2)
5.3.2 Setting Up WAN Load Balancing and Line
Back Up
Figure 5.8. Load Balancing Configuration
Description
will need to disable this feature. Otherwise, iPBX30 will
make incorrect judgment regarding the WAN link status
and thus affect the behavior of the load balancing or line
back up.
The interval that iPBX30 will check for the WAN link
status. The allowable value is 1 to 60 seconds.
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you don't need to provide any IP address here, unless you
know the traffic must pass a specific network device.
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you don't need to provide any IP address here, unless you
know the traffic must pass a specific network device.
Chapter 5
43