Modify A Self-Access Rule; Delete A Self-Access Rule; Figure 9.8 Self-Access Acl Configuration Example - Asus iPBX30 User Manual

Chapter 9
Example
The figure below shows a sample self-access ACL configuration to
allow HTTP traffic from any one to iPBX30.
Figure 9.8. Self-Access ACL Configuration Example

9.6.2 Modify a Self-Access Rule

To modify a Self-Access rule, follow the instructions below:
1. Click Firewall/NAT ->Self-Access ACL menu to open the Self-
Access ACL configuration page.
2. Click on the icon of the Self-Access rule to be modified in the
Existing Self-Access ACL table or select the Self-Access ACL
from the ID drop-down list.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, service, time and log.
4. Click on the "Modify" button to save the changes. The new
settings for this Self-Access rule will then be displayed in the
Existing Self-Access ACL table located at the bottom half of the
Self-Access ACL configuration page.

9.6.3 Delete a Self-Access Rule

To delete a Self-Access rule, click on the icon of the rule to be
deleted.
78
iPBX30 User Manual