Configuring Dhcp Server; Figure 6.1 Dhcp Server Configuration Page - Asus iPBX30 User Manual

Chapter 6
6.1.3 Configuring DHCP Server
First, you must configure your PCs to accept DHCP information
assigned by a DHCP server:
1. Click Advanced -> DHCP Server menu to open the DHCP
Server Configuration page.
Figure 6.1. DHCP Server Configuration Page
2. Enter the information for the IP Address Pool (Begin/End
Address), Subnet Mask, Lease Time and Default Gateway IP
Address, fields; others, such as Primary/Secondary DNS Server
IP Address and Primary/Secondary WINS Server IP Address
are optional. However, it is recommended that you enter the
primary DNS server IP address in the space provided. You
may enter the LAN IP or your ISP's DNS IP in the primary DNS
Server IP Address field. The table below describes the DHCP
configuration parameters in detail.
46
Note: By default, the iPBX30 is configured as a
DHCP server on the LAN side, with a predefined IP
address pool of 192.168.1.100 through 192.168.1.149
(subnet mask 255.255.255.0). To change this range
of addresses, follow the procedures described in this
section.
iPBX30 User Manual