High End Systems MMS200 User Manual page 69

Software Upload using Echo
The internal software for the MMS200 can be upgraded remotely via DMX using the Echo application and a USB DMX widget or an Upload module.
Below is the outline for the uploading procedure
Software update procedure
Be sure the DMX Widget or Upload module has correct drivers installed, contact support if assistance is needed
l
Connect the MMS200 via DMX to the Upload Module or DMX widget
l
Connect the DMX Widget or Upload module to a computer that has the latest version of Echo installed.
l
Start the Echo software
l
Choose Device in the menu Bar - Discover All Devices from the menu.
l
After the scanning process is complete, the connected MMS200 will appear in the Device tree in the left column.
l
Select the Device in the menu bar.
l
Select upgrade device in the menu
l
The application will prompt you to select the upgrade file, navigate and select the appropriate file to upload to the MMS200
l
The discovered devices will be shown in a selection window, select which device to update.
l
Confirm the selection, and the process with begin and complete automatically.
l
After upgrading the fixture will restart itself and home. The process is complete when the homing is complete.
l
MMS200 User Guide --- (Details subject to change, and clarification)
69