High End Systems MMS200 User Manual page 21

MMS200 Mirror Head Homing
When the MMS200 fixture is connected to an appropriately-rated power source, it will automatically begin a homing procedure to verify its orientation.
The mirror will move through a number of moves to determine the its precise location relative to its full range of travel.
There are various ways to home a fixture depending on what is connected to the MMS200
Control Console
Menu Screen - Button Option
Select MMS200, and select Home Pan/Tilt, found in the Control section of the Slot Tool-Bar
(Hog4 for example)
Via Menu Navigation (As Shown)
MMS200 User Guide --- (Details subject to change, and clarification)
21