DMX Control Setup and Test
Patching the MMS200 Fixture to a Hog4 Console requires a single fixture type to control the motion - MMS200
To view mirror motion of the MMS200 fixture:
Be sure the attached fixture is operating, and if a shutter is present, be sure it is open.
l
Send an image to the projector via the attached source or internal pattern (this will vary based on attach equipment)
l
Select the MMS200 on the control console, adjust the pan and tilt parameters as desired.
l
NOTE: If you have trouble seeing mirror movement and you are not using a lighting console from High End Systems, check that the library for your
desk has the correct default settings for all DMX channels. Please see the
MMS200 User Guide --- (Details subject to change, and clarification)
DMX protocol
to ensure the library is sending correct defaults to the fixture.
32