High End Systems MMS200 User Manual page 40

Set Menu (SET)
---> Changing the Display Output (DSPL)
You can manually set the fixture's LED display to on or off.
To apply change the display setting:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the DSPL menu press <Enter>.
4. Scroll to ON to set the LED display to normal intensity.
5. Press <Enter> to store.
Set Menu (SET)
---> Inverting Pan (P/IN)
This menu items inverts the direction of the Pan Motor, allowing the fixture to reverse its pan direction. This is useful when
using fixtures mounted opposite of each other
To apply pan invert setting:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the P/in menu press <Enter>.
4. Scroll to ON to invert the pan motion, or OFF for normal operation.
5. Press <Enter> to store.
Set Menu (SET)
---> Inverting Tilt (T/IN)
This menu items inverts the direction of the Tilt Motor, allowing the fixture to reverse its tilt direction. This is useful when using
fixtures mounted opposite of each other.
To apply tilt invert setting:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the T/in menu press <Enter>.
4. Scroll to ON to invert the pan motion, or OFF for normal operation.
5. Press <Enter> to store.
MMS200 User Guide --- (Details subject to change, and clarification)
40