High End Systems MMS200 User Manual page 20

Powering on the MMS200
To power the MMS200, simply connect the fixture to an appropriately-rated power source.
WARNING:
This equipment is designed for connection to a branch circuit having a maximum overload protection of 20 A.
CAUTION:
Do not power on the fixture until verifying that the line cord cap is suitable for the power source in your loc-
ation. For more information, see Attaching a Power Cord Cap in Appendix. Be sure no mirror can move freely
and will not strike anything.
CAUTION:
Always isolate MMS200 fixtures from generators with a UPS or good quality power conditioner to prevent dam-
age. Specific damage can occur due to generator drop-outs, sharp voltage and frequency fluctuations.
MMS200 User Guide --- (Details subject to change, and clarification)
20