High End Systems MMS200 User Manual page 22

Mounting the MMS200 to a Projector
The alignment of the MMS200 mirror to the projector's optical path is critical for good performance. In addition, the physical attachment of the
MMS200 must be correct to not cause damage to the projector nor the fixture nor cause bodily harm.
Key Points to note:
Visually inspect the structural integrity of the projector handling frame, as well as the MMS200 frame. If either are dam-
l
aged, do not continue.
Ensure that the (4) mounting clamps that are used to attach the MMS200 to the projector touring frame are closed, locked,
l
and tightened properly.
Ensure that the safety cable is firmly attached to the projector touring frame and the projector safety point.
l
The alignment of the MMS200's mirror needs to be centered to optical lens path, adjust the physical alignment of the
l
MMS200's mirror to the projector frame first
The horizontal lens travel should be centered in its path, this will correspond to the center of the mirror pan rotation.
l
The vertical lens travel should placed to minimize lens vignetting, while remaining as close as possible to the lens rotation
l
center.
It is critical that the mirror has good alignment to the optical path. This alignment is critical to the graphic auto-rotation fea-
l
ture to work correctly.
MMS200 User Guide --- (Details subject to change, and clarification)
22