High End Systems MMS200 User Manual page 38

MMS200 Menu Options
The LED display consists of a tree structure with editable items at the end of navigation.
Below is a chart for quick reference.
Section Sub-section
ADDR ..
SET FACT
DSPL
P/IN
T/IN
SWAP
MODE XLD
TEST HOME
BOOT
SELF
INFO VER
UNIQ
F/HR
DMX
M/VR
Fields
C### 1-505
ON Factory Defaults ON
OFF Factory Defaults OFF
ON Set LED Display ON
OFF Set LED Display OFF
ON Set Pan Invert ON
OFF Set Pan Invert OFF
ON Set Tilt Invert ON
OFF Set Tilt Invert Off
ON Pan / Tilt Swap - ON
OFF Pan / Tilt Swap - OFF
YES Cross-load firmware to other MMS200
NO Cancels Cross-load operation
HOLD Homes Fixture when Hold is selected
NO Default Safe Mode
YES - DONE Indicates that boot copy has been performed, Homing will follow
YES - EMPTY Indicates that spare boot is empty, upload or cross-load to perform
PAN Fixture Pan Test
TILT Fixture Tilt Test
... Software Version Number
... Unique ID Number
... Total Fixture hours
1-512 Shows incoming DMX Value for selected Ch.
MOTR Shows Motor HW. SW. Version
DISP Show LED HW. SW. Version
MMS200 User Guide --- (Details subject to change, and clarification)
Options
38